Timing Chain Idler Sprocket Installation - Left Side
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure that the left camshaft intermediate drive chain idler (2) is being installed. The recessed hub (3) and the larger sprocket of the left camshaft intermediate drive chain idler is installed outward. The raised hub and the smaller sprocket of the left camshaft intermediate drive chain idler is installed towards the block.
- Place the left camshaft intermediate drive chain idler to the cylinder block.
- Install the camshaft intermediate drive chain idler bolt and tighten to 58 N.m (43 lb ft).
CAUTION:
Refer to Fastener Caution
.