Left Camshaft Cover

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Spark Plug Shield Tube Seals, J 5590 & J-25254-A

Courtesy of GENERAL MOTORS CORP.

Install the NEW left spark plug shield tube seals using the J 5590: driver (1) and J 24254-A: installer (2).

Fig 2: Identifying Left Camshaft Cover Gasket

Courtesy of GENERAL MOTORS CORP.

Install the NEW left camshaft cover gasket.

Fig 3: View Of Oil Fill Cap

Courtesy of GENERAL MOTORS CORP.

Install the oil fill cap.

Fig 4: Identifying Fuel Injector Sight Shield Cover Ballstud

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the fuel injector sight shield cover ballstud and tighten to 10 N.m (89 lb in).

Fig 5: Identifying Camshaft Cover Bolt Grommets

Courtesy of GENERAL MOTORS CORP.

NOTE: The camshaft cover bolt insulator must be installed into the camshaft cover bolt hole before installing the camshaft cover bolt.

Install the NEW left camshaft cover bolt insulators.