LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 2013 (Engine Mechanical - 3.6L (4 Of 6)) >> Repair Instructions - Off Vehicle (2 Of 4) >> Piston, Connecting Rod, and Bearing Cleaning and Inspection >> Connecting Rod Cleaning Procedure

Connecting Rod Cleaning Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the connecting rods in solvent.
    2. WARNING: Refer to Safety Glasses Warning .
  2. Dry the connecting rod using compressed air.
  3. Remove the connecting rod cap and clean the threads.
  4. Remove the connecting rod bearing and discard. Never reuse a connecting rod bearing used in a running engine.
scientia non olet · About LEMON Manuals