LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 2011 (Engine Mechanical - 3.6L (3 Of 6)) >> Repair Instructions - On Vehicle (2 Of 2) >> Engine Oil Pressure Sensor and/or Switch Replacement (LY7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Pressure Sensor
    GM1832048Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Component Fastener Tightening Caution .
  1. Install the oil pressure sensor (1) and tighten to 20 N.m (15 lb ft).
  2. Connect the oil pressure sensor electrical connector.
scientia non olet · About LEMON Manuals