LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 2011 (Engine Mechanical - 3.6L (3 Of 6)) >> Repair Instructions - On Vehicle (2 Of 2) >> Crankshaft Rear Oil Seal and Housing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine flywheel. Refer to Engine Flywheel Replacement (LY7)  or Engine Flywheel Replacement (LCS) .
  2. Remove the oil pan. Refer to Oil Pan Replacement .
    3. Fig 1: Locating Crankshaft Rear Oil Seal Housing Bolts
    GM1306175Courtesy of GENERAL MOTORS CORP.
  3. Remove the crankshaft rear oil seal and housing. Refer to Crankshaft Rear Oil Seal and Housing Removal .
scientia non olet · About LEMON Manuals