Intake Manifold Removal (LCS)

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Positive Crankcase Ventilation Tube

Courtesy of GENERAL MOTORS CORP.

Disconnect and remove the positive crankcase ventilation (PCV) tube (1) from the intake manifold and right camshaft cover.
Remove the evaporative (EVAP) hose from the intake manifold and EVAP solenoid.

Fig 2: EVAP Solenoid & Bolt

Courtesy of GENERAL MOTORS CORP.

Loosen the EVAP solenoid bolt.
Remove the EVAP solenoid (1).

Fig 3: Fuel Pump Cover & Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the fuel pump cover bolt (1).
Remove the fuel pump cover (2).

Fig 4: Intake Manifold & Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the intake manifold bolts (1, 2).
Remove the intake manifold assembly (3).

Fig 5: Intake Manifold Gasket

Courtesy of GENERAL MOTORS CORP.

Remove and discard the intake manifold gasket (1).