LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 2008 (Vibration Symptoms Diagnosis And Correction) >> Diagnostic Information and Procedures >> Transfer Case Output Flange Runout Measurement >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

J-7872:  Magnetic Base Dial Indicator Set, or equivalent

NOTE: This measurement procedure is intended to measure transmission or transfer case output flange runout for systems with a constant velocity (CV) joint, rubber coupling or bolt-on U-joint yoke at the transmission or transfer case.
scientia non olet · About LEMON Manuals