Conditions for Setting the DTC: P2724
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
The TCM detects an incorrect off-going clutch gear ratio, or tie-up, when the 1-2-3-4 clutch is commanded OFF and the following is achieved:
- The 1-2-3-4 clutch commanded pressure is 0 kPa for a calculated amount of time.
- The transmission input shaft speed is 40 RPM or less from the anticipated input shaft speed for 1.2 seconds or greater.