Circuit/System Verification (Non-Hybrid)
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, engine OFF, observe the TCC Duty Cycle Sol. CKT Status parameter while commanding the TCC Control Solenoid to 90 percent and then back to 0 percent with a scan tool. The reading should display OK or Indeterminate.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.