LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1998 (Engine Controls And Fuel - 3.6L (LCS) - DTC P0638 To DTC P2229) >> DTC P0856 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, open the hood to disable the Auto-Stop function.
  2. Ignition ON, verify the scan tool hood position parameter displays Open.
    • If the hood position does not display Open, refer to DTC P254F .
  3. Observe the Freeze Frame/Failure Records with a scan tool.
  4. Clear the DTCs with a scan tool.
  5. Ignition OFF for 30 seconds.
  6. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
    • If DTC P0856 failed this ignition, replace the EBCM.
scientia non olet · About LEMON Manuals