Conditions for Setting the DTC

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: The ECM detects engine movement by sensing the airflow through the mass air flow (MAF) sensor is more than 3 g/s, or by sensing crankshaft position (CKP) sensor pulses.

The ECM detects that the starter is commanded on and the engine has been cranking for more than 4 seconds without a CMP sensor pulse.
OR
The ECM detects that the engine has started, but did not received a CMP sensor pulse during the first engine revolution.
OR
The ECM detects that the engine is running, but does not receive a CMP sensor pulse for 800 of 1,000 engine cycles.