Circuit/System Verification
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure the transmission fluid temperature is between 50-80°C (122-176°F).
- Operate the vehicle in 2nd gear long enough to ensure at least a 3°C (5°F) rise in TCM temperature.
- Place the gear selector in Reverse for 5 seconds and then idle vehicle for 5 seconds.
- Verify the scan tool Shift Sol. 1 CKT Status parameter display OK.
- If not the specified value, replace the control solenoid (w/body and TCM) valve assembly.
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.