LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1994 (Automatic Transmission - 6T75 - DTC P0218 To DTC P0977) >> DTC P0601-P0604 or P062F >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine running for at least 1 minute.
  2. Ignition OFF for 30 seconds.
  3. Ignition ON, verify that DTC P0602 is not set.
    • If the DTC is set, program the transmission control module (TCM). If the DTC resets, replace the control solenoid (w/body and TCM) valve assembly.
  4. Observe the DTC information with a scan tool. DTCs P0601, P0603, P0604, and P062F should not set.
    • If a DTC sets, replace the control solenoid (w/body and TCM) valve assembly.
  5. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.