Component Testing
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the transmission shift lever.
- Test for 6.6-7.0K ohms of resistance between terminals 2 and 6 of the automatic transmission control.
- If not within the specified range, replace the transmission shift lever.
- Test for 1.7-2.1K ohms of resistance between terminals 2 and 6 of the automatic transmission control while pressing the upshift button.
- If not within the specified range, replace the transmission shift lever.
- Test for 3.8-4.2K ohms of resistance between terminals 2 and 6 of the automatic transmission control while pressing the downshift button.
- If not within the specified range, replace the transmission shift lever.