LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1993 (Automatic Transmission - 4T45-E - DTC P0218 To DTC P0961) >> DTC P0719 or P0724 >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the stop lamp switch for proper adjustment; refer to Stop Lamp Switch Replacement . With the stop lamp switch removed, use a DMM to measure to resistance across the pins for the ignition 1 voltage circuit and the stop lamp switch signal circuit. With the plunger released on the stop lamp switch the resistance should display infinite on the DMM. With the plunger depressed on the stop lamp switch the resistance should display less than 10 ohms.

scientia non olet · About LEMON Manuals