LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1993 (Automatic Transmission - 4T45-E - DTC P0218 To DTC P0961) >> DTC P0705 (Non-Hybrid) >> Circuit/System Verification (Non-Hybrid)

Circuit/System Verification (Non-Hybrid)

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, engine OFF, observe the scan tool TR Sw. parameter while moving the gear shift lever from Park, to Reverse and through all the ranges. The parameter should match each gear range that is selected.
  2. Observe the TR Sw. A/B/C/P parameter while moving the gear shift lever from Park, to Reverse and through all the ranges. The TR Sw. A/B/C/P parameter should correspond with the Transmission Range Switch Logic table.
  3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.