Component Testing
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Perform the Line Pressure Check .
- Perform the Control Solenoid Valve and Transmission Control Module Assembly Solenoid Performance Test
.
- If a concern is found, replace the control solenoid (w/body and TCM) valve assembly.
- Inspect the trans fluid pump ball check valve for possible sticking or damage.
- If you found a concern with this check ball, repair the concern.
- Inspect the valve body assembly for sticking or damaged valves.
- If you found a stuck or damaged valve, repair or replace the valve or valve body.
- Inspect the variable low and 1-2 reverse clutch for a stuck On or damaged condition.
- If you found a variable low and 1-2 reverse clutch concern, repair or replace the variable low and 1-2 reverse clutch assembly as necessary.