Component Testing
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Perform the Line Pressure Check .
- Perform the Control Solenoid Valve and Transmission Control Module Assembly Solenoid Performance Test
.
- If a concern is found, replace the control solenoid (w/body and TCM) valve assembly.
- Inspect the trans fluid pump ball check valve for possible sticking or damage.
- If you found a concern with this check ball, repair the concern.
- Inspect the reverse clutch regulator valve for sticking or damage.
- If you found a concern with the reverse clutch regulator valve, repair or replace the valve or valve body.
- Inspect the 1-3 reverse clutch assembly for a slipping or damaged condition.
- If you found a 1-3 reverse clutch assembly concern, repair or replace the 1-3 clutch assembly as necessary.