LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1969 (Transfer Case - GETRAG 760) >> Repair Instructions - On Vehicle >> Transfer Case Fluid Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fill Plug & Drain Plug
    GM1824982Courtesy of GENERAL MOTORS CORP.
  1. Clean the drain plug.
    2. CAUTION: Refer to Component Fastener Tightening Caution .
  2. Install the drain plug (2) and tighten to 39 N.m (29 lb ft).
  3. Fill the transfer case with synthetic gear lubricant GM P/N 89021677 (Canadian P/N 89021678) to the bottom of the fill plug, or 0.80 L (0.85 qt).
  4. Install the fill plug (1) and tighten to 39 N.m (29 lb ft).
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals