Removal Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If one battery requires replacement, the other batteries also are to be replaced.
- Remove the generator battery temperature sensor wiring harness. Refer to Generator Battery Temperature Sensor Wiring Harness Replacement .
- Remove the generator battery nuts (1-4) from the battery cables.
- Remove the generator battery cables (1-4) from the batteries.
- Remove the generator battery bolts (1).
- Remove the generator battery.
- If required, remove the generator battery temperature sensor (1) from the battery.
NOTE:
Note original routing of battery cables to ensure proper installation.