LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1967 (Hybrid Energy Storage System - 2.4L (Hp7)) >> Diagnostic Information and Procedures >> DTC P0A80 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the other DCTs are set, they should be diagnosed first.
  2. Review the vehicle service history to determine if the battery pack has been replaced previously and not been reset with scan tool.
  3. Install the scan tool. Observe the Calc Hybrid Batt Resistance parameter in the ECM/Hybrid data list.
    • If resistance is greater than 55 m ohms, continue with Circuit/System Testing.
    • If resistance is less than 50 m ohms, clear the DTC and road test vehicle to determine if the DTC resets.