LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1963 (Automatic Transmission - 2MT70 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> On-Vehicle Repair Instructions >> Transmission Mount Replacement - Left Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the left transaxle mount to the frame.
  2. Fig 1: Left Mount Fastener Identification
    GM2167799Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  3. Install the left mount fasteners using the following sequence:
    1. Finger tighten the four bolts.
    2. Tighten bolt 1 to 27 N.m (20 lb ft).
    3. Tighten bolt 2 to 27 N.m (20 lb ft).
    4. Tighten bolt 3 to 27 N.m (20 lb ft).
    5. Tighten bolt 4 to 27 N.m (20 lb ft).
  4. Install the powertrain in the vehicle. Refer to Transmission Replacement .