Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Remove the drive motor generator power inverter module support. Refer to Generator Control Module Bracket Replacement .

Fig 1: Auxiliary Cooler Outlet Pipe Quick Connect Fitting And Auxiliary Cooler Outlet Pipe

Courtesy of GENERAL MOTORS CORP.

Disconnect the transmission fluid auxiliary cooler outlet pipe quick connect fitting (1) at the thermal bypass valve. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Remove the transmission fluid auxiliary cooler outlet pipe (2) from the thermal bypass valve.

Fig 2: Auxiliary Cooler Inlet Pipe, Bolt, Auxiliary Cooler Outlet Pipe Nut And Auxiliary Cooler Outlet Pipe Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the transmission fluid auxiliary cooler inlet pipe bolt (1).
Remove the transmission fluid auxiliary cooler inlet pipe (2).
Remove the transmission fluid auxiliary cooler outlet pipe nut (3)
Remove the transmission fluid auxiliary cooler outlet pipe bolt (4)
Remove the transmission fluid auxiliary cooler outlet pipe (5) from the vehicle.