4th Clutch Piston and Spring Assemble
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
4th Clutch Piston and Spring Assemble
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Clean and inspect all parts for wear or damage. |
|
| 1 | A/Trans Control Wiring Harness Shield |
| 2 | A/Trans Control Wiring Harness Shield Bolt M6 x 16 mm (Qty: 3) - External
CAUTION:
Refer to Fastener Caution
.
Tighten: 9 N.m (80 lb in) |
| 3 | Center Support Fluid Passage Plug |
| 4 | Drive Motor/Generator Position Sensor Pin |
| 5 | Drive Motor/Generator Position Sensor Stator Assembly |
| 6 | Generator/Drive Motor Position Sensor Switch Bolt M5 x 16 mm (Qty: 4) Procedure: Tighten the bolts in sequence shown. Tighten: 7 N.m (62 lb in) |
| 7 | A/Trans Control Wiring Harness Connector Bracket |
| 8 | 4th Clutch Piston Assembly |
| 9 | 4th Clutch Spring |
| 10 | 4th Clutch Spring Retainer Ring |