LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1963 (Automatic Transmission - 2MT70 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Diagnostic Information And Procedures >> Harsh, Soft, Delayed, or Slipping Reverse Gear

Harsh, Soft, Delayed, or Slipping Reverse Gear

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Checks Causes
Variable Low 1-2R Clutch Assembly
  • Inspect for damaged or worn VL1-2R clutch plates.
  • Inspect for damaged VL1-2R clutch piston, apply ring, and spring.
  • Inspect for cut, worn, or damaged VL1-2R clutch piston dam O-ring seal, inner seal, and outer seal.
  • Inspect for improper VL1-2R clutch backing plate retaining ring.
  • Inspect for damaged VL1-2R clutch backing plate
  • Inspect for worn splines on the backing plate.