LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1957 (Engine Controls And Fuel - 3.5L - Introduction) >> Repair Instructions >> Plastic Collar Quick Connect Fitting Service >> Connect Procedure

Connect Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Fuel Pipe Fitting Warning .
    Fig 1: Lubricating Male Pipe End
    GM155425Courtesy of GENERAL MOTORS CORP.
  1. Apply a few drops of clean engine oil to the male connection end.
  2. Fig 2: Connecting Quick-Connect Fittings
    GM21855Courtesy of GENERAL MOTORS CORP.
  3. Push both sides of the quick-connect fitting together in order to cause the retaining feature to snap into place.
  4. Fig 3: View Of Quick-Connect Fitting
    GM155399Courtesy of GENERAL MOTORS CORP.
  5. Once installed, pull on both sides of the connection in order to make sure the connection is secure.