LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1953 (Antilock Brake System - Hybrid 2.4L (Hp7)) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement (HP7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: BPMV Assembly
    GM1873931Courtesy of GENERAL MOTORS CORP.
  1. Install the BPMV (1) to the bracket.
    2. Fig 2: BPMV Bolt
    GM1873930Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the BPMV bolt (1) and tighten to 10 N.m (89 lb in).
    3. Fig 3: BPMV Bracket Bolts
    GM1873934Courtesy of GENERAL MOTORS CORP.
  3. Install the 2 BPMV bracket bolts (1) and tighten to 10 N.m (89 lb in).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals