LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1952 (Antilock Brake System - Hybrid 3.6L (Hp5)) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: BPMV Mosule & Bracket
    GM2192971Courtesy of GENERAL MOTORS CORP.
  1. Install the sleeves and insulators to the BPMV module assembly, if removed.
  2. Install the BPMV module assembly to the bracket (1).
    3. Fig 2: BPMV Bolts
    GM2192970Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  3. Install the 2 BPMV bolts (1) and tighten to 9 N.m (80 lb in).
    4. Fig 3: BPMV Bracket Bolts
    GM2193332Courtesy of GENERAL MOTORS CORP.
  4. Position the BPMV module and bracket assembly to the vehicle frame.
  5. Install the BPMV bracket bolts (1) and tighten to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals