Circuit/System Verification
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that no other DTCs are set.
- If DTC is set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Using a scan tool, perform the EBCM, Module Setup, EBCM Relearn.
- Verify that DTC C012D, C120A, C128A, C128D, C12BC, C12BD, or C12BE is not set.
- If DTC is set replace BPMV assembly. If the DTC resets, replace EBCM.