LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Automatic Transmission Servicing) >> Removal & Installation >> Fluid Filler Tube >> Removal

Fluid Filler Tube: Removal

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the indicator.
  2. Raise and support the vehicle.
  3. Disconnect the 3-way catalytic converter pipe.
  4. Remove the fluid filler tube bracket bolt from the fluid filler tube bracket. See Fig 1 .
  5. Remove the fluid filler tube.
Fig 1: Removing & Installing Fluid Filler Tube
G00087708Courtesy of GENERAL MOTORS CORP.