LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Automatic Transmission Servicing) >> Lubrication >> Oil Cooler Flushing & Flow Test >> Clean-Up

Oil Cooler Flushing & Flow Test: Clean-Up

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the water supply hose (7) from the transmission oil cooler and line flusher and bleed any remaining air pressure from the flusher tank (4). See Figure .
  2. Remove the fill cap (9) from the transmission oil cooler and line flusher and return any unused flushing solution to its container.
  3. Rinse the transmission oil cooler and line flusher with water. Do not store the transmission oil cooler and line flusher with flushing solution in it.
  4. After every 3rd use, clean the transmission oil cooler and line flusher as described in the instructions included with the tool.
  5. Dispose of any waste water/solution and transmission fluid in accordance with local regulations.
scientia non olet · About LEMON Manuals