LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1947 (Rear Suspension System) >> Repair Instructions >> Shock Absorber Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the shock to the vehicle.
    2. Fig 1: Identifying Upper Shock Bolt
    GM1828816Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the upper shock bolt and tighten to 110 N.m (81 lb ft).
    3. Fig 2: Identifying Lower Shock Bolt & Nut
    GM1828810Courtesy of GENERAL MOTORS CORP.
  3. Install the lower shock bolt and nut and tighten to 110 N.m (81 lb ft).
  4. Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals