Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: BPMV Supply And Return Hose Quick Connect Fittings

Courtesy of GENERAL MOTORS CORP.

Install the supply and return hoses to the vehicle and the retainers.
Connect the BPMV supply hose quick connect (1).
Ensure the supply hose quick connect is fully engaged by attempting to pull the return hose from the outlet fitting.
Connect the BPMV return hose quick connect (2).
Ensure the return hose quick connect is fully engaged by attempting to pull the supply hose from the inlet fitting.
Lower the vehicle.

Fig 2: Brake Master Cylinder Reservoir Supply And Return Hose Quick Connect Fittings

Courtesy of GENERAL MOTORS CORP.

Connect the brake master cylinder reservoir supply hose quick connect (1).
Connect the brake master cylinder reservoir return hose quick connect (2).
Fill the brake master cylinder reservoir. Refer to Master Cylinder Reservoir Filling (Without RPO HP5) or Master Cylinder Reservoir Filling (With RPO HP5) .