Arming the CTD System
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The system is not armed if the doors are locked manually. The keyless entry transmitter must be used to arm the CTD system.
Use the following procedure in order to arm the system:
- Place the shift lever in PARK.
- Turn OFF the ignition.
- Exit the vehicle.
- Lock the doors with the LOCK button on the transmitter. The system is in standby mode and will not start the arming timer until all doors are closed.
- The system will begin the arm sequence immediately after the last door is closed. If the keyless entry transmitter is used to arm the system after the vehicle doors are closed, the arm sequence will begin as soon as the LOCK command is received by the transmitter.