LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Heater Systems) >> Removal & Installation >> Temperature Actuator >> Installation

Temperature Actuator: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Install the air temperature actuator into the HVAC module. Install the temperature actuator retaining screws to the temperature actuator. See Fig 1. Tighten the screws to specification. See TORQUE SPECIFICATIONS . Connect the electrical connector to the air temperature actuator. Install the passenger side knee bolster.

Fig 1: Removing & Installing Temperature Actuator
G00185029Courtesy of GENERAL MOTORS CORP.