LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Heater Systems) >> Removal & Installation >> Blower Motor >> Installation

Blower Motor: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Install the fan cage to the blower motor. See Fig 2. Install the retaining clip to the fan cage. Install the blower motor to the case Install the retaining screws to the blower motor. Connect the electrical connectors to the blower motor. Secure the blower motor insulator (if equipped). See Fig 1. Install the coolant recovery tank or the surge tank.

Fig 1: Removing & Installing Blower Motor Insulator (RPO Option LB7)
G98H03361Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Main Blower Motor
G00185024Courtesy of GENERAL MOTORS CORP.