LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1936 (Wiper System & Washer System) >> Repair Instructions >> Rear Window Washer Nozzle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear spoiler. Refer to Rear Spoiler Replacement .
  2. Invert the spoiler and place on a clean dry, protected surface.
    3. Fig 1: High Mounted Stop Lamp Screws
    GM1872832Courtesy of GENERAL MOTORS CORP.
  3. Remove the spoiler to high mounted stop lamp screws (1).
  4. Disengage the washer hose from the spoiler.
  5. Disengage the electrical connector (2) from the spoiler bracket.
  6. Lift the high mounted stop lamp (3) from the spoiler.
    7. Fig 2: Washer Nozzle Screws
    GM1872833Courtesy of GENERAL MOTORS CORP.
  7. Remove the washer nozzle screws (1).
  8. Remove the rear washer nozzles (3) from the high mounted stop lamp (4) assembly.
  9. Disconnect the rear washer hose from the nozzles.
scientia non olet · About LEMON Manuals