Circuit/System Verification
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that DTC P0B3C, P0B3D, P0B3E, P0B41, P0B42, P0B43, P0B46, P0B47, P0B48, P0B4B, P0B4C, P0B4D, P0B50, P0B51, P0B52, P0B55, P0B56, P0B57, P0B5A, P0B5B, P0B5C, P0B5F, P0B60, P0B61, P0B64, P0B65, P0B66, P0B69, P0B6A, P0B6B, P0B6E, P0B6F, P0B70, P0B73, P0B74, P0B75, P0B78, P0B79, P0B7A, P0B7D, P0B7E, P0B7F, P0B82, P0B83, P0B84, P0B87, P0B88, P0B89, P0B8C, P0B8D, P0B8E, P0B91, P0B92, P0B93, P0B96, P0B97, P0B98, P0B9B, P0B9C, P0B9D, P0BA0,P0BA1, P0BA2, P0BA5, P0BA6, P0BA7, or P0ABB is not set.
- If any of the DTCs are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Clear the DTCs.
- Ignition ON, engine OFF, verify the scan tool Hybrid Battery Pack Calculated Voltage parameter is 198-320 V.
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.