Transaxle Brace: Removal

WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Remove the right front wheel. Remove the heat shield fasteners. See Fig 1 . Remove the heat shield. Remove the fasteners (1 and 3) from the brace. See Fig 2 . Remove the brace (2).

Fig 1: Removing & Installing Heat Shield

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing Transaxle Brace Bolts

Courtesy of GENERAL MOTORS CORP.