LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1929 (Engine Mechanical - 3.6L (2 Of 6)) >> Repair Instructions - On Vehicle (1 Of 2) >> Oil Level Indicator Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Level Indicator Tube & Bolt
    GM1829621Courtesy of GENERAL MOTORS CORP.
  1. Install a new seal on the oil level indicator tube.
  2. Install the oil level indicator tube.
    3. CAUTION: Refer to Fastener Caution
  3. Install the oil level indicator tube bolt and tighten to 10 N.m (89 lb in).
  4. Install the oil level indicator in the oil level indicator tube.
scientia non olet · About LEMON Manuals