LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1928 (Engine Mechanical - 3.5L) >> Repair Instructions - On Vehicle >> Valve Rocker Arm and Push Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Place the valve train components in a rack in order to ensure that the components are installed in the same location from which they were removed.
    Fig 1: Identifying Valve Rocker Arm & Bolt
    GM1557679Courtesy of GENERAL MOTORS CORP.
  1. Remove the valve rocker arm cover(s). Refer to Valve Rocker Arm Cover Replacement - Left Side  or Valve Rocker Arm Cover Replacement - Right Side .
  2. Loosen the valve rocker arm bolts.
  3. Remove the rocker arms.
  4. Remove the pushrods:
    • The intake push rods measure 147.51 mm (5.81 in).
    • The exhaust push rods measure 154.87 mm (6.1 in).
scientia non olet · About LEMON Manuals