LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1928 (Engine Mechanical - 3.5L) >> Repair Instructions - On Vehicle >> Intake Manifold Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Engine Oil Fill Cap
    GM1607915Courtesy of GENERAL MOTORS CORP.
  1. Align the cover to the studs on the engine, push down on the cover above the studs in order to engage the cover to the studs.
  2. Install the engine oil fill cap.
scientia non olet · About LEMON Manuals