LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1928 (Engine Mechanical - 3.5L) >> Repair Instructions - On Vehicle >> Engine Oil Pressure Sensor and/or Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Identifying Electrical Connector
    GM1608498Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the engine oil pressure sensor/switch electrical connector (1).
    3. Fig 2: Locating Engine Oil Pressure Sensor
    GM1609660Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine oil pressure sensor/switch.
scientia non olet · About LEMON Manuals