LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1926 (Power Steering System) >> Repair Instructions >> Power Steering Fluid Reservoir Replacement (LZ4) >> Assembly Procedure

Assembly Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Pump And Reservoir (CB Series)
    GM482357Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the new O-ring seal with power steering fluid.
  2. Install the new O-ring seal onto the neck of the power steering fluid reservoir (2).
  3. Install the power steering fluid reservoir (2) onto the power steering pump (1). Make sure it is engaged fully.
  4. Align the feet of the power steering fluid reservoir with the sides of the power steering pump (1).
  5. Install the new power steering fluid reservoir retaining clips (4) (supplied with the pump) and make sure the power steering fluid reservoir retaining clip tabs (3) fully engage with the power steering pump (1).
  6. Install the power steering pump. Refer to Power Steering Pump Replacement (LY7)  or Power Steering Pump Replacement (LZ4)  or Power Steering Pump Replacement (LE5) .
scientia non olet · About LEMON Manuals