Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Engine Oil Pressure Sensor

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the engine oil pressure switch. Tighten the switch to 22 N.m (16 lb ft).

Fig 2: View Of Starter And Engine Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the engine wiring harness electrical connector (2) to the oil pressure switch.
Install the starter. Refer to Starter Replacement (LE5/LAT) .