LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1923 (Engine Mechanical - 2.4L) >> Repair Instructions - On Vehicle >> Drive Belt Tensioner Replacement (LE5) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Drive Belt Tensioner
    GM1571145Courtesy of GENERAL MOTORS CORP.
  1. Position the drive belt tensioner.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the drive belt tensioner bolt and tighten to 45 N.m (33 lb ft).
  3. Install the drive belt. Refer to Drive Belt Replacement (LE5)  or Drive Belt Replacement (LAT) .
scientia non olet · About LEMON Manuals