LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1923 (Engine Mechanical - 2.4L) >> Repair Instructions - On Vehicle >> Drive Belt Replacement (LE5) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Belt Tensioner And Special Tool
    GM854300Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine splash shield. Refer to Engine Splash Shield Replacement .
  2. Install the J 44811  to the drive belt tensioner.
  3. Using the J 44811  , rotate the tensioner counterclockwise in order to release the tensioner from the drive belt.
    4. Fig 2: Drive Belt
    GM1571093Courtesy of GENERAL MOTORS CORP.
  4. Remove the drive belt.
  5. Slowly rotate the J 44811  and the tensioner clockwise in order to allow the tensioner to rest.
  6. Remove the J 44811  from the drive belt tensioner.
scientia non olet · About LEMON Manuals