LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1923 (Engine Mechanical - 2.4L) >> Repair Instructions - On Vehicle >> Camshaft Cover Replacement (LE5) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Camshaft Position Actuator Solenoid Valve Electrical Connectors
    GM1647538Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  3. Disconnect the intake (3) and exhaust (2) camshaft position actuator solenoid valve electrical connectors.
    4. Fig 2: View Of Engine Harness Clips
    GM1656114Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition coils. Refer to Ignition Coil Replacement .
  5. Remove the engine harness clips (1, 2) from the cover.
    6. Fig 3: Identifying Fuel Line
    GM1647977Courtesy of GENERAL MOTORS CORP.
  6. Remove the fuel feed line retainers (1, 2) from the engine brackets.
    7. Fig 4: Camshaft Cover
    GM1578306Courtesy of GENERAL MOTORS CORP.
  7. Remove the camshaft cover bolts.
  8. Remove the camshaft cover.
scientia non olet · About LEMON Manuals