Circuit/System Verification
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the scan tool Rear Doors Lock Cmd and Rear Doors Unlock Cmd parameters while using the driver door lock switch. The parameter should change between On and Off when changing between the commanded states.
- If the value does not change, refer to Door Lock Switch Malfunction.
- Command the door latches to LOCK and UNLOCK by using the driver door lock switch, the doors should perform the LOCK and UNLOCK functions.
- If a door latch does not LOCK or UNLOCK, refer to Door Lock Malfunction.