LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1914 (Automatic Transmission - 6T75 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Instructions >> Low and Reverse Clutch and 1-2-3-4 Clutch Plate Removal

Low and Reverse Clutch and 1-2-3-4 Clutch Plate Removal

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Low, Reverse Clutch & 1-2-3-4 Clutch Plates
GM1737798Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Low and Reverse Clutch Retainer Ring
2 Low and Reverse Clutch Assembly
3 1-2-3-4 Clutch (w/Friction Material) Plate Assembly (Qty: 2)
4 1-2-3-4 Clutch Plate (Qty: 2)
5 1-2-3-4 Clutch (Waved) Plate
6 1-2-3-4 Clutch Spring Retainer Ring
7 1-2-3-4 Clutch Spring
8 1-2-3-4 Clutch Piston
Tip: 
  • Use pliers to remove the piston.
  • Inspect the piston seals for damage and/or wear. The piston is reusable.